多功能集合式电表 CTEC-1700 CTEC1700 深圳市源恒通科技有限公司

产品目录

联系我们

源恒通公司-深圳总部

负责人一：
周先生：15875598924
     QQ   ：977630214
贸易通：yhtzhou
负责人二：
余先生：13714238170
        QQ ：294909432
   贸易通：twtes1718
电话：0755-27358803
传真：0755-27358080
地址：中国深圳市宝安区石岩街道巧通工业区D栋3楼

公司网址：
http://www.yht200805.com.cn
http://www.yht1718.com
http://www.yht1718.com.cn

产品详情

所在位置: 首页> 产品目录> 电工仪器仪表_电参数测量仪> 电表>

查看大图

产品名称：多功能集合式电表
产品型号：CTEC-1700 CTEC1700
产品厂商：台湾七泰 CHITAI
产品价格：0
折扣价格：0
产品文档：

你添加了1件商品查看购物车

简单介绍：

.产品名称：台湾七泰多功能集合式电表CTEC-1700 .产品型号：CTEC-1700|CTEC1700 .生产厂商：台湾七泰|CT|CHITAI|源恒通|YHT

详情介绍：

台湾七泰多功能集合式电表CTEC-1700

CTEC-1700 是一只能在電力網路內量測、計算並顯示所有主要電力參數的多功能電表，所提供的數據，是經由三相電壓及三相電流輸入所得到的真有效值(TRMS)。

CTEC-1700依據EMC(電磁相容)及國際安規之要求所設計，並在ISO 9001品質管理下所生產的電表；他的特點是高精度、小尺寸、易安裝及低價位。利用其內裝的RS485/232介面及Modbus通信協定，能輕易和其他通信網路結合；此外，他還提供兩組繼電器告警接點輸出(DO)，及兩組告警接點輸入(DI)。

特性

?Harmonic distortion measurement THD-V & RTHD-A(31st)
?Up to 21st harmonic analysis of V and A
?LCD back-light display
?2-alarm input (DI)
?2-alarm output (DO) V, A, W or Demand
?Demand measurement and alarm output
?Measurement of zero-phase current
?Precision True-RMS measurement
?RS485/232 communication interface
?PT and CT scaling
?10-year memory for all setup and energy data
?Auto calibration from computer
?Max, Min and Hold function
?Output DC 4 ~ 20mA and Pulse (option)
?96×96×158mm DIN case

詳細規格

Display:4 digits (9999) LCD back-light(V, A, W, VAR, PF, Hz)
5 digits (99999) LCD back-light(WH, VARH)
Accuracy:(at 23 ± 5℃ sine wave)
Voltage	± 0.1% of reading ± 0.1% of range
Current	± 0.1% of reading ± 0.1% of range
VA	± 0.2% of reading ± 0.2% of range
Watt	± 0.2% of reading ± 0.2% of range
Var	± 0.2% of reading ± 0.2% of range
Powe Factor	± 0.5% of reading
Watt Hour	± 0.2% of reading ± 1 count
Var Hour	± 0.2% of reading ± 1 count
Hz	± 0.05% of reading
Harmonic	± 0.2% of fundamental
Demand	± 0.4% of reading ± 0.2% of range
Max. input over capability	Amp. 10A continuous
	50A for 5 sec.
	Volt. 750V continuous
Conversion rate:(about)	about 1/sec.
Input burden	Volt. input ≦ 0.2 VA/phase
	Amp. input ≦ 0.2 VA/phase
Over input indication	"OL"
Line voltage range	60V～700V
Phase voltage range	35V ~ 400V
Current range	20mA ~ 6A
Power factor range	±0.5～±1
Frequency range	45～65Hz
CT, PT scaling factors	1～9999
Setting for REF	0.001 ~ 1.000
Operating temp.	0～60℃
Storage temp.	-10～70℃
Temp. coefficient	≦100PPM/℃(≦60PPM/℃,25℃±10℃)
Max. relative humidity	95%
Dielectric strength	AC 2KV/1min. (input/output/power)
AC 2.8KV/1min. (input/output/power/case)
Surge test	4 KV/1.2 X 50μS, IEC 255-4
Dimensions	96×96×158mm
Mounting	Panel mounting
Protocol	MODBUS, RTU
Baud rate	9600/19200/38400
Address range	1～255
Watt-hour data back-up time	10 years
Aux. power	AC90～260V, 50/60Hz
	DC24V, 48V, 110V±20% (option)
Power consumption	AC6VA, DC5W
Weight(about)	760g

TOP

開孔尺寸 (unit: mm)

TOP

通信連結

RS-232C CONNECTION

The figure bellow illustrates the wiring requirements for connecting the CT1700 using RS-232C communications. This can include a local direct connecting the CT1700 using RS-232C communications. This can include a local direct connection to a computer or other device. The RS-232C standard allows only a single point-to-point communication connection. Using this method, only one RS-232C equipped device may be connected to the serial port of the computer, or other device. The cable used between the computers is a standard RS-232C communication cable with a maximum length of 50 feet (15.2m).

RS-485 CONNECTION

RS-485 communication allows multiple devices to be connected on the same bus. Up to 30 devices can be connected on a single RS-485 bus, which consists of a shield twisted pair cable. The overall length of the RS-485 cable connecting all devices cannot exceed 4000 feet (1219m).

TOP

輸出的腳位圖